Reset the chip on PGI-72 using the suitable chip resetter
The inkjets Canon PGI-72 are equipped with a chip responsible for the recognition inside the printer and delivering ink level related information. Make use of the chip resetter and the refilled PGI-72 cartridges are fully functional inside Your PIXMA Pro 10 again.
We recommend to set back the cartridge´s chip while the cartridge PGI-72 is empty. The cartridges fit into the slot in the resetter only when the ink port is open and not closed by the orange cap. Another advantage of resetting the cartridge at that status is that You can check if the chip is still functional. This way You do not waste valuable refill ink on a damaged cartridge.
Place the empty PGI-72 cartridge into the slot provided in the resetter and press down towards the contacts in the resetter´s base. The LED in the cartridge lights up shortly when ccontact is made. During the reset sequence the LED is shining constantly and switches off as soon as the reprogramming is done. You can remove the cartridge from the resetter after the reset.
Chip resetter incl. ink, syringes and needles for Canon PGI-72
Refill inks for Canon PGI-72 cartridges, ten colours
Chip resetter for Canon PGI-72, Canon Pixma Pro 10