HP 934, HP 935 instruction Click'n'Fill refill tool

Our refill tool kit for HP 934 and HP 935 inkjet cartridges contains an individual Click'n'Fill clip for each color. This way You can be sure You are using the right tool for the right cartridge. The tool`s version for the black cartridges HP 934 is wider than the tools for cyan, magenta and yellow HP 935 cartridges. So the really big HP 934 XL black can be also refilled by using our Click'n'Fill  refill tool. The tool has a silicon rubber plate in its cartridge slot. This plate seals the ink port of the cartridge while refilling it.

Refill Your Hp 934, HP 935 cartridge as early as possible after You have received an ink warning message for that cartridge or a colors starts to be missing in Your printouts. Place the ink port on the silicon plate in the tool´s base and click the cartridge into its place by gently pressing on top of the cartridge at the other end. If the connector piece is mounted on the refill syringe, remove it to able to take the wanted amount of pigmented ink into the syringe.

The round end of the connector piece fits into the ink port on the Click´n´Fill refill tool. Place the connector back on the syringe´s tip. Place the connector into the tool´s ink port and press the syringe down carefully. Push down the plubger of the syringe slowly and the refill ink  flows through the channel in the tool inot the sponge of the empty HP 934, HP 935. During filling in the ink it can occur that ink foam appears out of the upper air port - this is due to that there always remains some residual ink from the previous filling inside the cartridge. Please remove this foam to avoid stains. The cartridge´s sponge above the ink port is filled either when You have filled the whole, wanted ink quantity or ink (not ink foam) comes out of the air port on the upper side. You can take the refilled HP 934, HP 935 inkjet cartridge from the refill tool and place it back into Your printer directly.