Refilling HP 950, 951, 953, 957 with refill tool QU-FILL Professional
The QU-FILL Profi in solid brass quality enables you to refill the HP 950, HP 951, HP 953, HP 957 ink cartridges without altering the cartridge. After a few simple preparing steps you can open the ball valve of the ink outlet with the QU-FILL Profi. Thereby a vacuum is created inside the cartridge and the ink is sucked into the cartridge automatically.
The HP 950, HP 951, HP 953, HP 957 cartridges are equipped with several vent holes. The outlets of the lateral air ducts are visible below the label as small immersions. At the front of the cartridge are 2 additional vent holes. For the refill techique with vacuum it is necessary to seal these holes. We use normal parcel tape which compensates even slightly elevations by firmly pressing it on.
Tips and Tricks from Pros
The vent holes are conected with air bags inside the cartridge. You need to exhaust the air from these air bags to fill in the ink.
With the QU-FILL Profi with Luer Lock syringe you can press air into the ink outlet. The arising pressure squeezes the air out of the bags through the vent holes. Afterwards seal the vent holes with parcel tape and press the QU-FILL Profi without syringe into the ink outlet to reduce the pressure.
Draw the recommended amount of ink into a 50ml Luer Lock syringe and screw the QU-FILL Profi on. The top of the tool fits easily into the ink outlet at the front. You feel a little resistance when opening the ball valve with the top of the QU-FILL Profi.
When pulling the plunger of the Luer Lock syringe up and holding it in the upper position for a while the vacuum evolves inside the cartridge. You can see air cells inside the ink in the syringe. When you let go of the plunger the ink runs into the cartridge to compensate the pressure and the plunger slowly slides back down.
After filling in the required amount of ink into the cartridge you need to remove the tape. Your next step should be to exchange the chip on the cartridge to continue printing with a working ink filling level indicator.
Amount of ink for HP 950, HP 951
It is important to fill in the exact amount of ink according to the cartridge type so that the chip can work properly. Thereby you get the actual capacity of pages and avoid wasting ink.
Standard version
- HP 950 Black 23 ml
- HP 951 Cyan 9 ml
- HP 951 Magenta 9 ml
- HP 951 Yellow 9 ml
XL version
- HP 950 Black XL 53 ml (by refilling the syringe several times)
- HP 951 Cyan XL 17 ml
- HP 951 Magenta XL 17 ml
- HP 951 Yellow XL 17 ml
Features of the HP 950, 951, 953, 957 cartridges:
So far there is no possibility to reset the chip on the cartridge. But as with nearly all printers it is possible to disable or ignore the ink filling level indicator and continue printing.Another way is to exchange the original chip with a new one from us (see right). The ink filling level is correctly displayed afterwards.
HP 950, 951 chips for black, cyan, magenta and yellow ink cartridges
Chip for HP 950, CN049AE cartridge black
Chip for HP 951, CN050AE cartridge cyan
Set of remanufactured ARA COLOR HP 950, 951 cartridges (non OEM)
ARA COLOR remanufactured HP 950 XL black cartridge for Officejet Pro (non OEM)
ARA COLOR remanufactured HP 951 XL cyan cartridge for Officejet Pro (non OEM)
Chip for HP 950 XL, CN045AE cartridge black
QU-Fill™ PROFI for HP® 932, 950, 953, 970, 980 and Primera spring valve cartridges, brass
HP 950XL, 951XL chips for black, cyan, magenta and yellow ink cartridges
Ink Refill Kit for HP 933, 940, 951 color
Refill ink compatible for HP 932, 940, 950 pigmented black