Refill Instructions for Epson Aculaser C900, 1900

To refill the Epson cartridge proceed as follows:

Remove the cartridge from your printer and place it on the table in front of you (picture 1). Loosen the screw (marked in picture 1) on the coloured cover and remove it. Beneath the cover you can see the sealing plug from the filler opening (picture 2). Carefully pull out the sealing plug. Now slowly fill in the toner into the filler opening. We recommend using a small funnel for that.

Note: Shake the toner powder inside the bottle well while refilling. By that the toner gets the best flow characteristics and you can esily fill it into the cartridge. After you have refilled the cartridge you need to reseal the filler opening with the sealing plug that you removed before.

Attention: Make sure that the cartridge is absolutely leak-free. You can check it through a light tapping of the cartridge on a white piece of paper. There should not trickle any toner out of the cartridge.

Safety instructions for the handling of refill toners

Refill toner and toner powder may cause serious health problems if not handled carefully. We recommend always using breathing protection or suction chambers while filling toner cartridges. Furthermore, toner powder and refill toner can be highly flammable with an appropriate oxygen mixture.  Please note as well, that you should touch the photoconductor drum in no case or expose it to direct sunlight. This could lead to faulty print-outs. Octopus Office will not take any responsibility for success or failure of the described procedure.
 

All trademarks, trade names or service marks are the property of their respective owners and are used for identification purposes only.